Polyaspartic Garage Floor Cost in Denver: Price Per Square Foot and by Garage Size
HomeGuide puts a polyaspartic floor coating at $5 to $12 per square foot, installed. That covers materials and professional labor. Bob Vila’s guide puts the average lower, at about $4 to $9 per square foot. The number for your garage comes from a free on-site walk-through and a written quote.
Polyaspartic is a UV-stable cousin of polyurea. HomeGuide calls it the highest performing garage coating, and the most expensive. We install polyaspartic floor coatings across the Denver metro. Square footage, slab condition, the system chosen and access set the price of each one.
What does polyaspartic cost per square foot?
HomeGuide splits its $5 to $12 per square foot into two lines. Materials run $2 to $6 per square foot, and labor runs $3 to $6.
| Cost line | HomeGuide, per square foot |
|---|---|
| Materials | $2 to $6 |
| Labor | $3 to $6 |
| Total, installed | $5 to $12 |
Labor carries at least half the bill. HomeGuide says it typically accounts for about 50 to 70 percent of the total project cost.
Part of that comes from the material itself. Bob Vila’s guide says polyaspartic sets in just 10 minutes, and it does not recommend a DIY install. Mixing and spreading on that clock takes practice. The rest of the labor goes into prep and into building the coats.
What does a polyaspartic garage floor cost?
HomeGuide also prices a polyaspartic garage floor by garage size. Its totals include materials and professional labor.
| Garage | Floor size | HomeGuide installed cost |
|---|---|---|
| One-car | 288 to 392 sq ft | $1,400 to $4,700 |
| Two-car | 400 to 576 sq ft | $2,000 to $6,900 |
| Three-car | 576 to 864 sq ft | $2,900 to $10,400 |
Bob Vila’s numbers run lower. Its guide says polyaspartic floor coating costs most homeowners $1,440 to $3,240. Its size table puts 250 square feet at $1,000 to $2,250, and 500 square feet at $2,000 to $4,500.
The gap has two causes. Bob Vila’s rate per foot is lower, and its average garage is smaller. Divide its $1,440 to $3,240 by its $4 to $9 a foot, and you get 360 square feet. HomeGuide’s two-car garage runs 400 to 576 square feet.
To ballpark your own garage, measure it and multiply. A 20 by 20 two-car garage is 400 square feet. At HomeGuide’s $5 to $12 a foot, that floor comes to $2,000 to $4,800. Bob Vila’s size table puts the same 400 square feet at $1,600 to $3,600.
Size moves the rate as well as the total. HomeGuide says the cost per square foot often decreases for large projects. Our guide to what drives a garage floor coating quote explains why a single bay costs the most per foot.
How much more does polyaspartic cost than epoxy?
Both guides say polyaspartic usually costs more than epoxy. HomeGuide’s polyaspartic range runs $1 to $2 a square foot above its epoxy range. On a two-car garage, HomeGuide’s totals put the gap at about $400 to $1,100. Our epoxy flooring cost guide lists the epoxy prices by system and by space.
The build changes the price as well. HomeGuide says some contractors offer a blend of epoxy and polyaspartic layers to bring the cost down.
Bob Vila’s guide describes the same split. Some companies put an epoxy base under a polyaspartic top coat. Others skip the epoxy, since it takes longer to dry.
The two resins go on at very different thickness. HomeGuide lists polyaspartic at 2 to 6 mils per coat, and epoxy at 10 to 20 mils per coat. In a hybrid, the epoxy does the build and the polyaspartic takes the sun and the tires. Our epoxy vs polyaspartic comparison covers which build suits which garage.
What moves the price on your slab?
After square footage, slab condition moves the price the most. We diamond grind the slab first. Cracks get chased and filled, and spalls get patched. Oil gets treated before any coating goes down.
HomeGuide says minor prep work may be included in the base price, and extensive repairs or resurfacing cost extra. Our concrete resurfacing cost guide prices that work. Damage that deep is a job for concrete resurfacing and repair before the coating goes on.
A slab that is heaving, sinking or cracked through its full depth is a different case. An overlay will not fix it, and neither will a coating. That slab is a replacement question.
An old coating that is peeling has to come off first. Grinding it off adds time before any new material goes down.
Moisture testing is a smaller cost. HomeGuide puts moisture and hardness testing at $50 to $300. The size of the area and the number of tests set that price. It matters most on basement floor coatings, where a slab below grade can push water vapor up.
Flake adds material and labor. HomeGuide says customizations such as decorative flakes or custom colors can add $0.50 to $2.00 per square foot. A full-broadcast flake floor coating gets chip thrown until the base coat will not take any more. A solid color floor skips the chip.
Access and layout count too. HomeGuide says odd-shaped rooms and hard access to the work area make a job more complex. To save money, it suggests clearing the space yourself so the installers can get right to work.
Why Colorado garages pay the polyaspartic premium
Sun is one reason. HomeGuide rates polyaspartic’s UV resistance as excellent and epoxy’s as poor to fair. At Denver’s altitude the sun is strong, and plain epoxy ambers where it reaches the floor.
Cure time is another. HomeGuide puts a full cure at 1 to 2 days for polyaspartic and up to 1 week for epoxy. In a Denver winter, that means fewer nights with the cars parked outside.
Then there is the cold. HomeGuide lists a wide application temperature range for polyaspartic and a limited one for epoxy. In an unheated Front Range garage, that keeps winter install dates open. Our post on garage floors in Colorado winters covers what ice melt and freeze-thaw do to a slab.
How to compare two Denver polyaspartic quotes
Two quotes on the same garage can sit far apart for real reasons. Put them side by side and check these lines.
- Square footage. The quote should state the number it priced.
- Prep. The grind and any crack or spall repair should be listed.
- Moisture. Ask whether the slab gets tested, and what that costs.
- Flake. A full broadcast and a light scatter are different floors.
- The build. Ask whether it is all polyaspartic, or an epoxy base under a polyaspartic top coat.
- Coats. HomeGuide suggests asking how many coats go on and the total mil thickness.
HomeGuide also suggests asking for a cost breakdown that shows materials and labor. Quotes that carry those lines are easy to compare.
Getting a real number for your garage
We measure the garage and read the slab on a free on-site walk-through. The written quote names the prep and the system, and the number holds unless the scope changes.
We have been coating floors since 2008. Our garage floor coatings page shows the systems we install in garages across the Denver metro. We drive down from Denver for walk-throughs in Centennial, Highlands Ranch, Castle Rock and Parker. We are open seven days a week, and the walk-through and written quote cost nothing.